logo
गुणवत्ता श्रेष्ठ, गहनता सबसे पहले।

www.ohmalloy.com

घर
उत्पादों
हमारे बारे में
कारखाना भ्रमण
गुणवत्ता नियंत्रण
संपर्क करें
एक बोली का अनुरोध
कंपनी समाचार
होम उत्पादकम विस्तार मिश्र

20mm X 1.5mm Kovar Seamless Alloy Tube | Low CTE Matched to Borosilicate Glass for Hermetic Sealing

मैं अब ऑनलाइन चैट कर रहा हूँ
प्रमाणन
चीन Ohmalloy Material Co.,Ltd प्रमाणपत्र
चीन Ohmalloy Material Co.,Ltd प्रमाणपत्र
मैं लंबे समय तक निक्रोम की प्लेट खोजता हूं, और ओह्मालॉय सामग्री से इसे सफलतापूर्वक खरीदा है। OHMALLOY मिश्र धातु सेवा में वास्तविक अच्छी सेवा प्रदान करता है और हमेशा सही प्रतिरोध मिश्र धातु खोजने में मेरी मदद कर सकता है।

—— माइक हार्नेस

OHMALLOY मुझे थोड़े समय के साथ केवल 1kg कोवर मिश्र धातु के तार 1.0 मिमी के लिए उकसा सकता है, यह वास्तव में आश्चर्यजनक है। धन्यवाद

—— Janey

थर्मोकपल वायर और केबल में वास्तव में पेशेवर, जो मैं चाहता हूं वह केवल OHMALLOY से प्राप्त कर सकता है

—— क्रिस

लगातार कॉन्सटैनटन 0.08 मिमी, मैं इसे केवल 2kg प्राप्त करने की उम्मीद नहीं करता। लेकिन OHMALLOY इसे अच्छी गुणवत्ता के साथ मुझे आपूर्ति करते हैं। भगवान यीशु! चीन से इस तरह के एक विश्वसनीय आपूर्तिकर्ता

—— हारून

20mm X 1.5mm Kovar Seamless Alloy Tube | Low CTE Matched to Borosilicate Glass for Hermetic Sealing

20mm X 1.5mm Kovar Seamless Alloy Tube | Low CTE Matched to Borosilicate Glass for Hermetic Sealing
20mm X 1.5mm Kovar Seamless Alloy Tube | Low CTE Matched to Borosilicate Glass for Hermetic Sealing

बड़ी छवि :  20mm X 1.5mm Kovar Seamless Alloy Tube | Low CTE Matched to Borosilicate Glass for Hermetic Sealing सबसे अच्छी कीमत

उत्पाद विवरण:
उत्पत्ति के प्लेस: Jiangsu
ब्रांड नाम: OHMALLOY/OEM
प्रमाणन: ISO9001
मॉडल संख्या: SP-4J29
भुगतान & नौवहन नियमों:
न्यूनतम आदेश मात्रा: 20 किलो
मूल्य: USD18-28.5 per KG
पैकेजिंग विवरण: पेपर कार्टन+प्लाईवुड केस
प्रसव के समय: भुगतान के बाद 5-18 कार्य दिवस
भुगतान शर्तें: एल/सी, टी/टी
आपूर्ति की क्षमता: 50 टन मीटर प्रति माह
विस्तृत उत्पाद विवरण
नाम: 4J29 29Hк Bи कोवर ग्लास सीलिंग मिश्र धातु निलो K सामग्री: FENI29CO17
आपूर्ति आकार: रॉड/ट्यूब/प्लेट/तार/पट्टी औसत रैखिक विस्तार गुणांक (10-6): 4.6-5.2 (200-400 ℃)
क्यूरी तापमान: 435 ℃ आकार: 30mmx1.5mmx1500 मिमी

20mm X 1.5mm Kovar Seamless Alloy Tube | Low CTE Matched to Borosilicate Glass for Hermetic Sealing

 

Iron-nickel-cobalt alloy 4J29 alloy is also called Kovar alloy. 4J29 has a linear expansion coefficient close to that of silicon boron hard glass at 20 ° C to 450 ° C, which can be matched with hard glass to achieve sealing firmly. It has a high Curie point and has good low temperature tissue stability.

4J29 is mainly used for the glass sealing of electric vacuum components such as launch tubes, oscillation tubes, ignition tubes, magnetrons, transistors, sealed plugs, relays, integrated circuits, chassis, housings, brackets, etc.

 

4J29 Kovar Chemical Composition(%)

Grade C Si Mn P S Ni Co Fe Cu Cr Mo
4J29 ≤0.03 ≤0.3 ≤0.5 ≤0.02 ≤0.02 28.5-29.5 16.8-17.8 Balance ≤0. 2 ≤0. 2 ≤0. 2

 

 

 

 

When the average linear expansion coefficient reaches the standard stipulated conditions, the content of nickel and cobalt is allowed to deviate from the range specified in the table. The contents of aluminum, magnesium, zirconium and titanium are each not more than 0.10%, and the total amount should not be more than 0.20%

20mm X 1.5mm Kovar Seamless Alloy Tube | Low CTE Matched to Borosilicate Glass for Hermetic Sealing 0

 

4J29 Kovar Linear Expansion Coefficient:

Temperature Range 20~100℃ 20~300℃ 20~400℃ 20~450℃ 20~500℃ 20~600℃ 20~700℃
Average Linear Expansion Coefficient (10-6)

 

5.8

 

5.3

 

4.6-5.2

 

5.1-5.5

 

6.2

 

7.8

 

9.2

 

4J29 Kovar Physical Properties:

Density 8.17g/cm3
Curie Temp 435℃
Melting Point 1449℃
Thermal Conductivity 0.17 W/cm °C
Tensile Strength >518 MPa
Elongation >30%
Hardness >80HRB
Modulus of Elasticity 30 Mpsi

 

Supply Sate:

1. Sheet and foil (within a width of 2 meters)

Delivery status: hot rolled or cold rolled, annealed, pickled

 

2. Round plates and rings

Delivery status: hot rolled or cold rolled, annealed, pickled or machined

 

3. Wire

Delivery status: bright brushed, Hard, 1 / 4Hard, 1 / 2Hard, Soft

Specification: φ0.01-15mm, coiled, wrapped around a shaft or in roll form

 

4. Bar

Supply status: forged material, hot rolled material, cold drawn material, annealed state, pickled, machined or polished.

 

5. Forging

Delivery status: irregularly shaped forgings are provided upon request

 

6. Strip material (within 650mm, commonly used are 100mm, 150mm, 200mm, 300mm, 350mm)

Delivery status: 0.01mm-5.0mm, cold rolled, annealed, pickled or bright annealed

 

7. Flat wire, strip

 

4J29 Other Names Called International:

 

29HК / Kovar / Nilo K /  KV-1 / Dilver P0 /  Vacon 12 /  29HК-BИ / Rodar KV-2 / Techallony Glasseal 29-17 / Telcaseal KV-3 Dilver P1 / Silvar 48

सम्पर्क करने का विवरण
Ohmalloy Material Co.,Ltd

व्यक्ति से संपर्क करें: Mr. Qiu

दूरभाष: +8613795230939

हम करने के लिए सीधे अपनी जांच भेजें